Special end grain sealer – protects against cracks resulting from weathering!
Osmo End Grain Sealing Wax is especially suited for the end grains of decking made of hard and softwoods, such as Bangkirai, Teak, Massaranduba, Garapa, Cumaru as well as Pine, Spruce, Douglas Fir, Larch, Cedar, Thermowood etc.
![Based on renewable raw materials Based on renewable raw materials](/fileadmin/_processed_/2/e/csm_pim_file_12814_2b658e5040.jpg)
![Water and dirt repellent surface Water and dirt repellent surface](/fileadmin/_processed_/2/7/csm_pim_file_12808_8829ef8555.jpg)
![Reduces swelling and shrinkage Reduces swelling and shrinkage](/fileadmin/_processed_/2/3/csm_pim_file_12805_36bb8b8cc6.jpg)
![Recoatable after approx. 4-6 hours Recoatable after approx. 4-6 hours](/fileadmin/_processed_/2/0/csm_pim_file_12806_133c858165.jpg)
![5 m²/1 l 5 m²/1 l](/fileadmin/_processed_/6/1/csm_pim_file_12812_de0c368d5f.jpg)
![Protects end grains against cracks and splitting Protects end grains against cracks and splitting](/typo3temp/assets/_processed_/1/3/csm_Advantage_e7bc1f1b02.jpg)
![Free of water and silicones
Free of water and silicones](/typo3temp/assets/_processed_/1/3/csm_Advantage_e7bc1f1b02.jpg)
COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 0.375 | 10300151 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
TOOLS![Flat Brush Flat Brush](/fileadmin/_processed_/0/4/csm_pim_file_15048_645b3e49eb.png)
![Flat Brush Flat Brush](/fileadmin/_processed_/0/4/csm_pim_file_15048_645b3e49eb.png)
- Apply first coat generously, wet on wet, on raw end grain approx. 150-200 ml/m².
- Drying time approx. 3-4 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Ventilate well.
- Second coat approx. 150-200 ml/m².
- Drying time approx. 3-4 hours; see point 2.
![Verbrauchsrechner](/fileadmin/_processed_/1/c/csm_teaser-osmo-farbverbrauchsrechner_75c95204a2.jpg)
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.