Osmo Farbe

Stone and Terracotta Oil

colours

Ideal for protecting microporous stone and terracotta surfaces

Osmo Stone and Terracotta Oil is suitable for the clear impregnation of microporous natural stone with a polished, sanded or break surface and artificial stone in outdoor areas. Especially suited for paving and windowsills made of granite as well as limestone and slate.

Based on renewable raw materialsMicroporous and breathable surfaceWater and dirt repellent surfaceEasy to clean and maintainRecoatable after approx. 8-10 hours32 m²/1 lEnhances the colour of the substrate
Oil advantages – Simple application, Water beading effect, No flaking or peelingSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva
COLOUR CODECAN SIZE LITREARTICLE NUMBER

620 Clear

Satin

0.7511500112
2.5011500113

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat BrushMicrofiber RollerFlooring/Decking brushClothPad

Finished surface in 2 days, 2 coats

  1. With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece or Microfibre Roller, apply very thinly and spread well. Remove excess with a pad or lint-free cloth.
  2. Drying time approx. 8-10 hours (normal climatic conditions, 23 °C / 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
  3. Apply the second coat also very thin. When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.
  4. Drying time approx. 8-10 hours; see point 2. 
Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator