Wood Putty
colours
Extremely high filling strength, short drying times, good sanding properties.
Suitable for filling small cracks (< 2 mm) and small damages (e.g. screw holes) in wooden flooring and parquet. Can be used universally on all wood species. Not suitable for elastic constructions, e.g. plank, sprung, raised and false floors as well as cork flooring.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 1.00 | 13500025 | |
| 5.00 | 15100025 |
- Before preparing the putty in a bucket, stir well and ensure that all sediment is mixed into the putty.
- Mix in sanding dust, best from the same type of wood with a grit 80-120, into thick paste (approx. 15 % weight increase by adding sanding dust).
- Fill in flooring diagonally with Osmo Double Blade Scraper or a stainless steel trowel and at the same time press wood putty firmly into joints. Repeat process if necessary.
- After 30-60 minutes the dried paste can be sanded coarsely (grit P80) and afterwards finely sanded (grit P100-120) so that no wood putty is left on the surface of the parquet. In most cases, fine sanding with P100-120 is enough.
- Treatment with any oil-and-wax-based wood finish from Osmo can be carried out afterwards.
Note: As wood putty mixture and application strongly depends on wood species and sanding dust, a trial application is absolutely necessary! Do not fill joints in sprung or plank flooring!
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.