Hardener for Oil Stain
colours
Shortens drying times for Oil Stain significantly
Osmo Hardener for Oil Stain acts as an additive for Osmo Oil Stain that accelerates the drying process.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.06 | 15100528 |
Finished surface in 1 day, 2-3 coats
- Open the bottle of Hardener and pour contents into a 1.0 L can of Osmo Oil Stain. Empty the Hardener bottle completely. Stir thoroughly. Processing to be carried corresponds to that of Oil Stain
- Drying time approx. 4-5 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation. (1st and 2nd coat.)
- Final top coat is to be carried out with a clear Osmo Polyx®-Oil.
Note: Pot time is reduced down to 60 minutes by adding Hardener. Please do not mix together more material than you can certainly process within 45 minutes. If you do not use the entire can of Oil Stain, add 6 % Hardener – mix in a separate container!
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.