Top Oil Effect
colours
The renowned Top-Oil for a special effect!
Osmo Top-Oil Effect is ideally suited for producing special effects on wooden flooring in the interior. Through the application of Top-Oil Effect Natural / Raw, light-coloured interior wood is protected nearly invisibly – the natural wood colour and grain are not enhanced. Top-Oil Effect Silver/Gold, in contrast, is a decorative coating for darker wooden floors.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 10300113 | |
| 2.50 | 10300114 | ||
| 10.00 | 10300116 | ||
| 0.375 | 10100323 | |
| 0.75 | 10300071 | ||
| 2.50 | 10300072 | ||
| 0.375 | 10100324 | |
| 0.75 | 10300077 | ||
| 2.50 | 10300078 |
NUMBER OF COATS
For flooring, maximum one coat with Polyx®-Oil Effect Natural. The second coat is to be carried out with a clear Osmo Polyx®-Oil.
Finished surface in 2-3 days, 2-3 coats
(1st Top-Oil Effect, 2nd clear Top-Oil)
- First coat on the raw, sanded wood approx. 30-40 ml/m².
- Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
- Drying time approx. 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
- If desired, the dried finish can be smoothened with fine grain sandpaper (P400) or with a scouring pad before applying the second coat.
- Second coat approx. 30-40 ml/m² with clear Top-Oil.
- Drying time approx. 8-10 hours; see point 3.
Note: In order to achieve the desired effect of Silver/Gold on light-coloured wood species, first apply either Osmo Wood Wax Finish 3169 Black or Osmo Top-Oil 3075 Black as coloured base coat and allow to dry for 24 hours. It takes 1 day longer for the finished surface finish.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.