Slip-resistant top coat for exterior use!
Osmo Anti-Slip Decking Oil is especially suited for all timber decking and stairs in outdoor areas made of e.g. Bangkirai, Massaranduba, Garapa, Larch, Douglas Fir or Pine. Suitable for ribbed, grooved and particularly for smooth decking surfaces.
COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 0.75 | 11500074 | |
2.50 | 11500073 |
NUMBER OF COATS
One top coat on decking treated with a pigmented Osmo Decking-Oil. For renovations, normally one coat on the cleaner surface is sufficient – without sanding!
Finished surfaces in 2 days, 2 coats (base coat required)
(1st coat pigmented Wood-Oil, 2nd coat Anti-Slip Decking Oil)
- First pigmented coat with an Osmo Decking-Oil on raw wood approx. 35-45 ml/m².
- Mistakes in the wet coating can be corrected up to 15 minutes after the first application.
- Drying time approx. 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Ventilate well.
- Second coat (top coat) approx. 35-45 ml/m² with Anti-SlipDecking Oil. For renovations, normally one coat on the cleaned surface is sufficient.
- Drying time approx. 12 hours; see point 3.
Not suitable for Osmo Wood-Oil 007 Teak.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.