Clear Oil Wood Finish
colours
Extraordinarily versatile – for special applications on exterior wood!
Osmo Clear Oil Wood Finish is an extraordinarily versatile wood coating with many possibilities for use on wood surfaces in outdoor areas. It is ideal as a base coat for softwood, in particular rough sawn or greyed and weathered wood surfaces, to even out varying absorption rates. Osmo Clear Oil Wood Finish is also suitable as a slightly glossy top coat for Osmo One Coat Only HSPlus or Country Colour, when a slightly glossy and low maintenance surface is desired, expect for on white surfaces.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 11600001 | |
| 2.50 | 11600002 | ||
| 25.00 | 11600003 |
NUMBER OF COATS
One coat on the cleaned surface is enough.
Finished surface in 1 day, 1 coat (base or top required)
- First coat on raw wood approx. 65 ml/m².
- Drying time approx. 10-12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
- After thoroughly drying, carry out a top coat with Osmo Country Colour, One Coat Only HSPlus or Natural Oil Woodstain.
As clear, slightly glossy top coat: apply one coat very thinly along the wood grain to the thoroughly dried wood surface that has already been treated with a pigmented Osmo exterior finish and spread well.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.